Sleep Mode; Stop Or Pause Training - Kettler SG 7209-68 Instrucciones Informáticas Y De Formación

SLEEP MODE

If no RPM or PULSE is detected and no manual setting
is made within 4 minutes, then the device will switch to
Sleep Mode.

Stop or pause training.

– If training is paused and no further settings are
adjusted, the time will continue (TIME). Upon resum-
ing the workout the other units will also continue to
be counted (DISTANCE, CALORIES and PULSE).
– If the workout is stopped using the STOP button and
there is no further setting input, the time counter is
also stopped. After pressing the START button and
resuming the workout all units (TIME, DISTANCE,
CALORIES and PULSE) will continue to be counted.
– If the workout is stopped using the STOP button and
there is a change of user, program or target value
selection, all units (TIME, DISTANCE, CALORIES and
PULSE) will then begin counting from the standard
start value. IMPORTANT! In this case, the previous
training values are not saved!
– If the machine is removed from the mains or recon-
nected e.g. due to a change of location, all units
will be counted (TIME, DISTANCE, CALORIES and
PULSE) from the standard start value. IMPORTANT!
In this case, the previous training values are not
saved!
SG 7209-68
29
GB