Craftmade HE52 Guia De Instalacion página 6

5. Fan Assembly (with downrod). (cont.)
With the hanging bracket secured to the outlet
box and able to support the fan, you are now
ready to hang your fan. Grab the fan firmly with
two hands. Slide downrod through opening in
hanging bracket and let hanging ball rest on
wood ceiling joist
the hanging bracket. Turn the hanging ball slot
safety cable loop
until it lines up with the hanging bracket tab.
WARNING: Failure to align slot in hanging ball
with tab in hanging bracket may result in
wood screw
and washer
serious injury or death.
Tip: Seek the help of another person to hold
the stepladder in place and to help lift the fan
safety cable
up to you once you are set on the ladder.
hanging bracket tab
Find a secure attachment point (wood ceiling
joist highly recommended) and secure safety
hanging ball slot
cable. It will be necessary to use a heavy duty
wood screw, washer and lock washer (not
supplied) with the safety cable loop. If
necessary, adjust the loop at the end of the
safety cable. The loop at the end of the safety
cable should just fit over the threads on the
wood screw. Test safety cable by pulling on
diagram 5
loose end with pliers. If the safety cable slips,
the loop must be adjusted tighter. Extra cable
slack can be left in ceiling area. [Refer to
diagram 5.]
page 5