Datamars A15Xi Guia Del Usuario página 16

Using the mag key
You can use the mag key to put the energizer into standby mode and to turn it on
from standby. To use the mag key, hold the mag key against the mag key sensor
which is marked on the energizer case
Putting the energizer into standby mode
Instead of turning the energizer off at the wall, we recommend using the mag key to
put the energizer into standby mode. In standby mode, the energizer is on, but there
will be no output voltage at the fence output terminal.
To put the energizer into standby mode using the mag key:
Power indicator (green)
Energizer is in standby mode
Note:
Alternatively, the remote control can be used to put the energizer into standby
mode. See the remote control's user manual. All user manuals are available on the
website (see energizer packaging for details).
16
LED Flashing =
. The mag key sensor is located here:
Mag key sensor
Tap the mag key on
the mag key sensor