Focus Or Back-Focal Adjustment - Panasonic WV-BP330 Manual Del Operador

FOCUS OR BACK-FOCAL ADJUSTMENT

The following adjustment should be made by qualified
service personnel or system installers.
1. Loosen the screws on the back-focal adjusting
ring.
Focus adjustment for
CS-mount lens
Screws
2. Turn the back-focal adjusting ring to the desired
position.
Caution: When the C-mount lens is mounted, do
not rotate the ring counterclockwise by force
after it stops. If the ring is rotated by force, the
inner lens or CCD image sensor may be dam-
aged.
3. Tighten the screws on the back-focal adjusting
ring.
Note: If the camera is connected to the Quad
Focus adjustment for
C-mount lens
Back-focal
Adjusting Ring
-14-
System, glare may appear at the edge of the
camera picture on the monitor.
If this bothers you, adjust the lens focus to
reduce the glare.