Display Explanations; Installing Batteries - Health O Meter 7632 Manual De Instrucciones

Display Explanations

Display:
Memory
Zones
Icons:
Memory Zone 1 :
Memory Zone 2 :
Weak Battery Mark : Appears when batteries should be replaced
Pulse Mark :
Memory Mark :
Error Mark :

Installing Batteries

1. Place your thumb on the side of the battery cover. Pull the battery cover in
the direction of the cuff to open.
2. Install lower battery first in the bottom position with the battery ribbon
underneath. Battery Type: 2 Alkaline (AAA) size.
3. Insert the other battery and pull up the battery ribbon over it.
4. Replace the cover by placing the end tabs of the battery cover in the slots
on the top of the battery compartment. Click in the other end to secure the
battery cover.
Date/Time Indicator
Systolic Pressure
Diastolic Pressure
Pulse Rate
No. of Memory Sequence
Appears when the monitor is operated
in memory zone 1
Appears when the monitor is operated
in memory zone 2
Shows the pulse rate per minute
Shows the number of stored measurements
Occurs when an error was made during
measurement
9
1.
2.