OK to confirm the switching to TV input terminal. After
switching, the signal source menu disappears, and at the
upper right corner of screen displays the information of
current signal source.
Pressing this key repeatedly can exit from the signal
source menu.
In case of no other operation, the signal source menu
will automatically disappear upon reaching the OSD
disappearance time preset in the main menu.
Searching Channel
In this section, how to use the remote control to set
channel is explained. You can also use buttons on the TV
set to set channel.
Channel Type
A
MENU on the remote control unit or MENU on
Press
the TV's front panel to display main menu, and then
press CH+ /CH- to select Tuning menu,Press OK/
VOL+ to enter.
B
CH+ /CH- to select the Channel Type option,
Press
Press OK/VOL+ to enter, and then press VOL- / VOL+
to select Air or Cable.
Basic Receiving and Playing Operations
Channel Edit
Note: Only available in the source of TV and Tuning lock
in the H.Lock menu is off.
A
MENU on the remote control unit or MENU on
Press
the TV's front panel to display main menu, and then
press CH+ /CH- to select Tuning menu.Press OK/
VOL+to enter.
B
Press
CH+ /CH- to select the Channel Edit
option, and then press OK to enter submenu.
Channel Edit
Fine Tune
Color system
Skip
Fine Tune
Press CH+ /CH- to select the Fine Tune option,
and then press VOL- / VOL+ to start UP or DOWN
fine tuning until obtaining a relatively good
picture effect. The fine tuning function is for the
purpose of improving picture effect through fine
tuning when that of a certain program is not good
enough. Normally, the optimal picture effect can
be obtained without fine tuning when watching TV
programs, and fine tuning is to meet the need of
adjusting a certain program.
Color system
Press CH+ /CH- to select the Color Systems option,
and then press VOL- / VOL+ to select correct color
system.
The TV is designed with four systems for your
choice, i.e. Auto, NTSC ,PAL-M, PAL-N, the system
is set as Auto and it is not necessary to make an
adjustment. The system is normally set as Auto
during auto search.
Skip
When the skip is set ON, the channel will be
skipped when pressing CH+ or CH- and only can be
selected by pressing 0-9 numerical keys.
If you want to recover the skipped channel
LCD television Owner's Manual
112.25MHz
NTSC
OFF
Return
Move
OK
Menu
OK
13