Haier L26F6 El Manual Del Propietario página 23

Basic Receiving and Playing Operations
equipment to the above-mentioned file system.
C
To achieve smooth playing, ensure the following:
• The file code rate should be lower than 300KB/S;
• Due to the limitation of USB signal transmission
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
• Use high-speed USB equipment in conformity
with USB2.0 full speed Interface Standard; If USB
equipment in conformity with USB1.1 full speed
Interface Standard is used, the playing may be
unsmooth.
When connecting/removing the USB
device
A
INPUT on the remote control unit to select
Press
USB option.
B
Insert USB equipment into corresponding USB
interface 2s after starting the system.
C
After entering the system menu, press
remote control unit to select the require USB files,
press OK button to confirm the selection and enter
the file list relative to the selection.
D
Press 5/6on the remote control unit to select the
required file, press OK button to enter the selected file.
E
To exit the streaming media playing system and
watch a TV program, you must press BACK button to
return to the streaming media main menu at first (to
protect equipment), and then press BACK to return
to source you previouslywatched.
Note
While playing the USB, press BACK button
repeatly, the screen picture will return to USB main
interface, and only at this time you can switch
corresponding signal sources by pressing INPUT
again.
Please do not unplug the USB device when the
connected USB storage device is working. When such
device is suddenly separated or unplugged, the stored
files or the USB storage device may be damaged.
Operating the USB device
22 LCD television Owner's Manual
A
B
C
D
E
F
G
Playing a Picture
3/4on the
A
B
C
D
E
Press 3/4to scroll through main menu or submenu
and select your desired option.
OK to confirm your selection.
Press
Press / to achieve the FWD (fast forward) and
REV (fast back) of the option being played.
Press to play, and press it again to pause playing.
ZOOM to magnify pictures; when the picture is
Press
enlarged, press and
3/4
BACK repeatedly to return to the main menu.
Press
STOP to stop playing a music.
Press
Note
You can choose the photos or music in different
R
files to play together.
After entering USB main interface, press
select PHOTO item.
OK to confirm the selection and enter the
Press
picture file list.
Press 3/4 to select the picture you want to play,
press OK to confirm, and then press OK button to
play the pictures.
If you want to pause the picture which is being
palyed, press the button again.
Press ZOOM to magnify the picture. When the
picture is enlarged, press 3/4 and 5/6 to move
the picture.
To exit playing, just press
to move the picture.
5/6
3/4 to
BACK repeatedly.