Maintenance; Troubleshooting - Haier L26F6 El Manual Del Propietario

Maintenance/Troubleshooting
Press5/6 to select the Slide Effect Menu option, and
then press 3/4 to set Diagonal/Waterfall/Randow/
No Effect/Bottom To Top/Top To Bottom/Right To
Left/Left To Right/Snake/Cross. Press5/6 to select
the Music Repeat Mode Menu option, and then press
3/4 to set On/Off/Random.
D
To exit the Sut up mode, just press

Maintenance

Maintenance
Early malfunctions can be prevented. Careful and regular
cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug
the power cord before you begin any cleaning.
Cleaning the Screen
A
Here's a great way to keep the dust off your screen
for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it's almost dry, and
then use it to wipe the screen.
B
Make sure the excess water is off the screen, and
then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time
(such as a vacation), it's a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.

Troubleshooting

For the sake of time and cost, it is strongly
recommended that you checkout the problem by
yourself according to the instructions listed hereunder
before contacting the after-sales service for technical
24 LCD television Owner's Manual
BACK repeatedly.
assistance.
Problem
Turn onthe power supply; Properly
plug theTV setto the powersocket;
No
Check to see if the power cable of other
picture,
appliance is plugged in the TV set. Make
no sound
sure that the power cable of the TV set
is properly connected.
Problem
Good
Depress the volume button;
picture,
Check out theaudio frequency input signals.
no sound
Check to see if the remote controller
Failure of
display receiving window are blocked
remote
by other objects and if batteries are
controller
properly loaded.
Designate the item of color from the
Picture menu and depress the volume
No color,
button; Keep the display and VCR
weak color
separate a reasonable space; Activate
or poor
some functions to store picture
picture brightness; Make sure that the display
and signal source are available and
turned on.
Excessive
brightness Adjust brightness or contrast.
or darkness
Picture
too big or
Adjust the setup of sizes.
small
One
speaker Balance the sound in the menu.
failure
Slight
sound
It is a normal phenomenon.
from
display
Note
Do not leave the television with static picture in an
R
extended period as it may result in residual image
on your television screen.
Note
Production of the screen requires high and precision
R
technologies. However, there might be some
dank or bright (red, blue or green) spots, or some
Possible remedies
Possible remedies