Descargar Imprimir esta página

Pulmic INDUSTRIAL 15 + VITON Manual Del Usuario página 24

Publicidad

Idiomas disponibles

Idiomas disponibles

In
PULMIC INDUSTRIAL
the charge
15 + VITON
status indicator is on the
button 3S integrated as
only one light next to
the
speedo
indicator.
While the light is on
securely with the color
corresponding
to
selected
speed,
indicates that the state
of the battery charge is
adequate,
when the
selected speed regard-
less of color and activa-
tes the flashing red light
means that the battery is discharged and in a few minutes the
spray will stop working, requiring to be recharged or replaced
the battery to keep running.
RECHARGE AND BATTERY MAINTENANCE
The battery is a very sensitive subjected to wear, to lengthen
its life is important to read the charging and maintenance
recommendations.
To recharge the batteries, remove the battery from its release
toggled and moving up the battery ref. 7826 (see fig. 3), then
connect the charger to the mains ref.7827 its 100/240VAC
connection.
Once the green light of the charger, connect the 21v plug. DC
battery making ref.7826 located in the rear side. Subsequently
changes from green to red light, indicating that the rechar-
ging process has begun.
The approximate time for recharging is 7-8 hours (depending
on the level of discharge of the battery). After final charging,
remove the connector from battery housing and then remove
the battery charger ref. 7827 of the main electric web.
the
also
24
Indicator
Light

Publicidad

loading