Vetus BMON Manual De Manejo Y Instrucciones De Instalación página 21

Enter the actual battery charge condition
as a percentage (range 0 .. 99.9%).
Make sure that the battery is fully
charged. Then set the value to 99.9%.
Use the '<' button to increase the value of
the actual charge condition.
Use the '>' button to decrease the value of the actual charge
condition.
Now hold the '<' and the '>' buttons
pressed simultaneously until 'H?8' appears in
the display.
Enter the factor for the battery quality (for
example 99.9%, in the range 0 .. 99.9%).
Use the '<' button to increase the value of
the battery quality.
Use the '>' button to decrease the value of
the battery quality.
Battery monitor
Explanation:
It is possible to enter a value for the battery quality. If the battery
is in poor condition (old, often been discharged, etc.) it is possi-
ble to show that the battery is not 100% efficient.
Use 99.9% for a completely new battery reducing to 50% when
the battery is in poor condition.
If it is not clear what factor should be used for the battery quality
then enter the value 99.9%.
Exiting SETUP mode and saving the data:
Hold the '<' and the '>' buttons pressed
simultaneously until 'H?2?7' appears in the
display and then release the '<' and the '>'
buttons.
If no button is pressed for more than 30 seconds while in
SETUP mode then SETUP mode is automatically exited. No
data will then be saved!
ENGLISH
Note!
9.0422
21