6.2 FlexiBridge Standard mode
This mode is active when you activate the
hob. It connects the sections into two
separate cooking zones. You can set the
heat setting for each zone separately. Use
two left side control bars.
Correct cookware position:
Incorrect cookware position:
16
ENGLISH
> 160 mm
6.3 FlexiBridge Big Bridge mode
To activate the mode touch
the correct mode indicator . This mode
connects three rear sections into one cooking
zone. The front section is not connected and
operates as a separate cooking zone. You
can set the heat setting for each zone
separately. Use two left side control bars.
Correct cookware position:
To use this mode you have to place the
cookware on the three connected sections. If
you use cookware smaller than two sections
the display shows
zone switches off.
Incorrect cookware position:
until you see
and after 2 minutes the