Important; Orientating The Air Flow - AERMEC FCWI 222V Manual De Uso E Instalación

IMPORTANT

– If the fan coil is switched off, all the settings previously made will be stored in the memory, apart from the SLEEP and TIMER
functions.
– If the fan coil is switched on using the auxiliary key (ON/OFF), the SLEEP and TIMER functions will be deleted.

ORIENTATING THE AIR FLOW

The deflector fins on the air supply are designed to channel the
air in two directions:
– vertical fins, to be manually orientated
– a motorised horizontal deflector, to be orientated only with
the LOUVER or SWING key of the TLW3 remote control, or
with the SWEEP key of the PFW3 wired panel
ORIENTATING THE VERTICAL FINS
– Rotate the vertical fins as shown in the figure
– In both heating and cooling mode, it's better not to direct the
air flow directly onto people
MOTORISED HORIZONTAL DEFLECTOR
Never orientate the motorised horizontal deflector manually.
Any manual intervention on the deflector could damage the
system and cause malfunctioning.
When the unit is idle, the motorised deflectors close and cover
the entire air flow outlet.
IMPORTANT
In certain external conditions, condensation may form on the
surface of the deflector (in cooling or dehumidification mode),
and drip onto the surface below.
30
TLW3
FCWI
Adjust the air flow direction as shown in
the figure.
TLW3
TLW2
LOUVER
PFW2