AERMEC FCWI 222V Manual De Uso E Instalación página 34

SWEEP
Press SW button to turn on/off the louver stepper motor.
Note: if the indoor fan is stopped by other functions or protective systems, the louver will be forced to stop and the SW key will not be enabled.
LOUVER
Press LV button to change the angle of the louver stepper motor.
• Press and release the button to change the angle of the ventilation louver one step at a time.
• Press and hold the button to change the angle of the ventilation louver continuously (until the button is released).
NB: when the LV or LOUVER button is pressed, the Sweep function is cancelled.
CLOCK
The clock on the LCD of Remote unit can be set by
• If you press the key, the
• Press or to set the clock. Hold the button for fast changing.
• Press again, the symbol
AUTO START TIMER
The air-conditioner can be programmed to turn on in advance.
• If you press ON, the ON symbol and the start time will flash.
• Press or to set the start timer. Hold the button for fast changing.
Pressing ON again, the ON symbol and the start time will stop flashing.
To annul this function, press
AUTO STOP TIMER
The air-conditioner can be programmed to turn off in advance.
• If you press OFF, the OFF symbol and the stop time will flash.
• Press or to set the stop timer. Hold the button for fast changing.
• Pressing OFF again, the OFF symbol and the stop time will stop flashing.
To cancel this function, press
SLEEP
Press the SLEEP key to start the Sleep function. The LCD on remote unit will show
After 1 hour, the controlled temperature will be automatically adjusted for greater comfort and energy savings during Sleep mode. The
bol on LCD will disappear at this moment.
To cancel this function, press SLEEP key again.
NB: the SLEEP function can only be used in COOL, HEAT or AUTO mode.
ECONO
Press ECONO key to start the energy saving function. The LCD on the remote control unit will show the ECONO symbol. The temperature setting
and fan speed setting will disappear.
The controller will adjust the controlled temperature and fan speed automatically for the energy saving purpose.
To cancel this function, press ECONO key again.
NB: the ECONO function can only be used in COOL, HEAT or AUTO mode.
TURBO
Press TURBO key to start the fast cooling/heating function. The LCD on the remote unit will show TURBO symbol. The temperature setting and
fan speed setting will disappear.
The controller will adjust the controlled temperature and fan speed automatically for 30 minutes. After that, TURBO symbol will disappear and
the temperature setting & fan speed setting will resume to their previous settings before the turbo is activated.
To cancel this function before 30 minutes, press TURBO button again.
NB: the TURBO function can only be used in COOL, HEAT or AUTO mode.
KEYLOCK
Hold the button for 2 seconds will lock all the buttons on the remote unit. The LCD on the remote unit will show the
and hold the key again for 2 seconds, to release them.
SEND
Press SEND to transmit all the parameters shown on the LCD to the main control board.
34
symbol and the time will flash.
and time display will stop blinking.
POWER OFF POWER OFF
ON again.
POWER OFF POWER OFF
POWER OFF POWER OFF
POWER OFF
POWER OFF POWER OFF
button again.
POWER OFF POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER OFF
POWER ON POWER ON
COLD COLD
POWER ON
POWER OFF POWER OFF
POWER OFF
POWER ON POWER ON POWER ON POWER ON
COLD COLD
COOL COOL POWER ON
HEAT HEAT
POWER OFF
POWER OFF POWER OFF COOL
POWER ON
COLD
POWER OFF
POWER OFF
POWER ON POWER ON
POWER ON POWER ON
COOL COOL POWER ON
HEAT HEAT
COLD COLD
POWER ON
COOL
POWER ON
COLD
POWER ON
symbol.
COOL
HEAT
COLD
COOL
POWER OFF
POWER ON POWER ON
POWER ON
COOL COOL HEAT HEAT
COOL
HEAT
POWER ON
COOL
HEAT
POWER ON
POWER ON
COLD
POWER OFF
POWER ON
POWER ON
COOL
HEAT
COOL
POWER ON
COLD COLD
POWER ON
COLD
POWER ON POWER ON
COLD
COOL
HEAT HEAT
POWER ON
POWER ON
COOL
HEAT
COLD
HEAT
POWER ON
POWER OFF
HEAT
POWER OFF
COLD
HEAT
POWER ON
COLD
sym-
POWER ON
COOL
HEAT
symbol. Press