Cloning With A Muc (Optional Accessory) - Motorola DTR720 Guia Del Usuario

English
3 Press the Menu/OK button.
The display shows Cloning... on both Master
Radio, and Slave Radio.
If successful:
• The display shows Cloned Successfully on the
Master Radio.
If unsuccessful:
• The display shows Cloning Failed on the Master
Radio.
Cloning with a MUC (Optional
Accessory)
To clone radios using the Multi-Unit Charger, you must
obtain at least two radios:
• A fully charged battery in each of the radios.
• a Source radio (radio from which the profiles are cloned
or copied).
• a Target radio (radio to which the profiles are cloned
from the source radio).
46
The Source radio has to be in Pocket 1 and 2, while the
Target radio has to be in Pocket 4 and 5, matching in
the MUCs pockets by pairs as follows:
- 1 and 2
- 4 and 5
MUC pockets numbers should be read from left to right
with the Motorola Solutions logo facing front.
Paired Target radios and Source radios must be of the
same band type in order for the cloning to run
successfully.
When cloning, the MUC does not need to be plugged
into a power source, but all radios require charged
batteries.