Troubleshooting
The following table explains the ways to troubleshoot if the
symptom occurred.
Symptoms and Solutions
If...
Then...
No Power
Recharge or replace the Li-Ion bat-
tery.
Extreme operating temperatures
may affect battery life.
Refer to
page
Unable to read
Ensure that one side of the pro-
the radio (using
gramming cable is connected to the
the CPS)
radio and the other side of the pro-
gramming cable is connected to the
USB port.
Verify that the switch on the pro-
gramming cable is set at "Digital"
About Li-Ion Battery on
14.
If...
Then...
position or "Flash" position in older
version programming cable.
Ensure that the radio is positioned
correctly inside the Single Unit
Charger (radio making proper con-
tact with the charger).
Radio gener-
Radio does not transmit when it is
ates continuous
receiving as receive mode has high-
tone when PTT
er priority than transmit mode.
is pressed
Press the PTT button again when
receive mode ends.
Radio does not
If there are other users who are us-
transmit when
ing the channel, the radio does not
pressing the ra-
transmit. Try again after verifying
dio PTT button
that nobody else is talking.
By default, the radio PTT button is
disabled on the radio whenever
there is an earpiece connected to it.
Make sure to use the earpiece in-
line PTT button to transmit instead.
English
63