Festo 152962 Manual De Instrucciones página 23

Electrical safety

Disconnect from all sources of electrical power!
– Switch off the power supply before working on the circuit.
– Please note that electrical energy may be stored in individual components.
Further information on this issue is available in the data sheets and operating
instructions included with the components.

The hydraulic unit must be switched off and its mains plug must be removed from the electric outlet
before installation, repair, maintenance and cleaning work.

Risk of death in case of interrupted protective conductor!
– The protective conductor (yellow-green) must not be interrupted,
either inside or outside of the hydraulic unit.
– The insulation of the protective conductor must never be damaged
or removed.

The electric motor's ventilation slots must not be covered!

Set the hydraulic unit up so that switches and interrupters are easy to activate.

Hazard-free operation of the device is no longer possible in the case of:
– Visible damage
– Malfunction
– Incorrect storage
– Incorrect transport
– Immediately remove the mains plug from the electric outlet.
– Protect the device against inadvertent restart.
© Festo Didactic 369805
Hydraulic power packs with 5 l tank
23