meibes Basic Pro Manual De Instrucciones página 71

1.3 Basic functi... 10:29
Tube collector
Delta T control
1.3.2 Tube colle... 10:32
Activation
1.3.5 dT-control
dT-ON 1
dT-OFF 1
1.5 Protective f... 10:35
Tank cooling
1.5.5 Cooling fu... 10:36
Activation
›1.3 Basic functions‹ appears.
Another selection level appears.
Once the first subitem ›Tube collector‹ is selected, ...
... ›1.3.2 Tube collectors‹ appears.
This option is to be activated in case
vacuum tube collectors are used.
Return to ›1.3 Basic functions‹.
Continue with ›Delta T control‹.
›1.3.5 dT control‹ appears.
Here, parameters of the controller can be changed.
10:33
8.0K
The factory settings of the Basic Pro
can be used for almost all plants.
4.0K
Ask a fitter before making changes at this point.
Return to ›1.3 Basic functions‹.
Continue with ›Protective functions‹.
›1.5 Protective funct.‹ appears.
Another selection level appears.
Continue with ›Tank cooling‹.
›1.5.5 Cooling funct.‹ appears.
This option must be activated if, during a heat wave,
the heat input exceeds the energy withdrawal.
In this case, the controller cools the
tank via the collectors, e. g. at night.
Return to ›1 Main menu‹. Continue with ›Monitoring‹.
Operation mode
25