meibes Basic Pro Manual De Instrucciones página 75

1.10 Service Wi...
M02:
Breakage of sensor
on TS1!
Menu
1.10 Service Wi...
M02:
Breakage of sensor
on TS1
Menu
1.10 Service Wi...
Possible reasons:
Cable/connection
Sensor
1.10 Service Wi...
Please check
the connection cable
to the sensor.
1.10 Service Wi...
Disconnect it
and measure
its resistance.
›1.10 Service Wizard‹ appears.
The malfunction appears in plan text - here:
›M02: Breakage of sensor on TS1!‹.
If an analysis/repair is not required at present,
Next
press ›Menu‹ to return to the main menu.
The Service Wizard helps detect
possible causes of malfunctions.
Acknowledge by pressing ›Next‹.
Next
For this malfunction, the following causes are assumed:
›Cable/connection‹ or ›Sensor‹ - select the first menu
item and confirm by pressing ›OK‹.
Exit
The controller here provides the troubleshooting
instruction to check the connection cable.
Perform the measure in accordance
with the recommendation.
Next
Acknowledge by pressing ›Next‹.
More detailed instructions
are available if required.
Acknowledge by pressing ›Next‹.
Next
Malfunction
29