Klarstein Brotilde Family Manual Del Usuario página 43

• Glazed fruits such as cherries, ginger, pineapple, etc. should be washed
and well-dried on kitchen paper towel before adding into the dispenser.
Sticky ingredients can also be tossed in a little flour to help dispensing.
• Bottled or canned ingredients such as olives, sun dried tomatoes etc.
should be drained and well-dried on kitchen paper towel before adding
to the dispenser.
• It is recommended that the dispenser be cleaned thoroughly with a soft,
damp cloth after each use.
d. The Fruit and Nut Dispenser will automatically release its contents in the
following modes: Normal, Fluffy, Whole Grain, Sweet, Express/Quick,
Dough, Gluten Free and Cake. You may notice the base of the dispenser
flips open during the bread making cycle even when it is empty. This is normal
as the dispenser automatically releases the ingredients.
5. When you switch on the appliance, the LCD display shows „1 TIMER 3:20".
Press the MENU button to select the preferable programme. You can choose
between Normal, Fluffy, Whole Grain, Sweet, Express/Quick, Dough,
Pasta/Noodles Dough, Low Carb, Gluten Free, Cake, Marmelade, Bake,
Knead, Yoghurt, Homemade and Homemade 2.
6. Press the COLOR button and then use the rotary button to select the bread color
(LIGHT, MEDIUM or DARK). The default color is MEDIUM.
7. Press the LOAF button and then use the rotary button to select the size of 500 g,
750 g or 1 kg). The default size is 1 kg.
8. If you want to delay the working time, press the rotary button to adjust the time, the
calculated formula for time is:
Working time = start time of the programme + delay time
9. Press the START/PAUSE/STOP button to start the bread maker. The ":" indicator will
flash on the LED display.
• To stop the bread maker, press the START/PAUSE/STOP button for 2 seconds.
• If you want to pause the process, short press the START/PAUSE/STOP button.
The time indicator will then flash on the LED display. If you want to continue the
current programme phase, press the button short again. If you want to cancel
the programme, press and hold the button for 2 seconds.
10. When the time is up, the LED display shows "0:00" and the appliance beeps
10 times, The bread maker will then enter the keep warm procedure and the ":"
will flash on the LED display. After 1 hour in keep warm mode, it will beep 10 times
again. The LED will stop flashing and return to the defaulted status. If you want to
cancel the warm‑keeping mode prematurely, press the START/PAUSE/STOP button
for one second. The appliance will beep once and stop operation.
1 1. When the appliance beeps, this indicates the programme is finished. Disconnect the
power plug from the socket before removing the bread. Pull the bread pan straight
out of the appliance with oven gloves on. Turn the bread pan upside down and
shake gently until the bread falls out. Remove the kneading blade from the back of
the bread with oven gloves. The bread is now ready to eat.
Note: Before removing the bread, press the START/PAUSE/STOP button for 2 seconds
to stop operation.
EN
43