Technical Data; Assembly/Installation - ABNOX AXDV-N1 Manual De Instrucciones

Technical data

Model
Configuration
Dosing range [mm³]
Dosing range [ml]
Weight [kg]
Connection (medium intake) inside thread
Connection (medium intake) outside thread
Connection (medium discharge/pressure discharge) inside
thread
Optimal medium intake working pressure [bar]
Max. medium intake working pressure [bar]
Connection (compressed air) inside thread
Bleed hose connection
Min./max. pneumatic operating pressure [bar]
Optimal pneumatic operating pressure [bar]
Compressed air quality

Assembly/installation

The product has to be set up or installed at the
intended installation site under consideration of the
following conditions.
• The applicable legal provisions on site have to be
clarified and compliance must be assured.
• The available space has to be clarified prior to
installation/setup of the product in order to ensure
ongoing safe operation for the personnel and
product. The product has to be set up/installed so
that ongoing safe operation is assured.
• The product may only be set up and put into
operation by qualified personnel with corresponding
special training.
• The product is designed for use in rooms protected
against the effects of weather (industry standard).
• Operation and storage in aggressive, excessively
damp environments or outdoors may lead to
corrosion damage.
• The valves can be installed in any position.
• The distance to the application surface depends on
the desired application pattern.
AXDV-N1
Standard (assembly block)
3 - 200
0.003 - 0.200
0.78
G 1/8"
G 1/8"
G 1/8"
1 - 6
12
M5 for hose ø4 mm
ø4 mm
5 / 7
6
ISO 8573-1:2020 [6:4:4]
en
21