Orbegozo FDI 94 Manual De Instalación página 116

MANDO A DISTANCIA FDI 94 124 184 244
HOW TO USE THE FUNCTIONS
DRY operation (dehumidifying)
1. Press the MODE button to select DRY mode.
2. Set your desired temperature using the Temp ▲ or
Temp ▼ button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can't be changed in DRY mode.
SETTING TEMPERATURE
The operating temperature range for units is 17-
30ºC(62ºF-86ºF). You can increase or decrease the set
tEmperature in 1ºC(1ºF)increments.
AUTO operation
In AUTO mode, the unit will automatically select the
COOL, FAN, HEAT or DRY mode based on the set
temperature.
1. Press the MODE button to select Auto mode.
2. Set your desired temperature using the Temp or
Temp button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED can't be set in Auto mode.
COOL operation
1. Press the MODE button to select COOL mode.
2. Set your desired temperature using the Temp ▲ or
Temp ▼ button.
3. Press the FAN button to select the fan speed:
AUTO, LOW, MED,or HIGH.
4. Press the ON/OFF button to start the unit.
16