Noise And Vibration - Flex LD 16-8 125 R Instrucciones De Funcionamiento Originales

LD 16-8 125 R / LDE 16-8 125 R
Do not use chainsaw discs or serrated

cutting discs.
Tools/attachments of this kind frequently
lead to kickback or loss of control over
the power tool.
Additional safety notices
Use only extension cables approved for

outside use.
Sanding lead-based paints is not

recommended. The removal of lead-
based paints should be carried out by a
specialist.
Do not work on materials that release

hazardous substances (e.g. asbestos).
Implement safety measures if there is a
danger of dust being generated that is
hazardous to health, combustible or
explosive. Wear a dust mask. Use local
exhaust ventilation.
MATERIAL DAMAGE!
The mains voltage and the voltage

specifications on the rating plate must
correspond.

Noise and vibration

WARNING!
The specified measured values refer to new
power tools. Daily use causes the noise and
vibration values to change.
NOTE
The vibration emission level given in this
information sheet has been measured in
accordance with a standardised test given in
EN 60745 and may be used to compare one
tool with another. It may be used for a
preliminary assessment of exposure. The
declared vibration emission level represents
the main applications of the tool.
However, if the tool is used for different
applications, with different cutting
accessories or poor maintenance, the
vibration emission level may differ. This may
significantly increase the exposure level
over the total working period.
To make an accurate estimation of the
vibration exposure level, it is also necessary
to take into account the times when the tool
is switched off or running but not actually in
use. This may significantly decrease the
exposure level over the total working period.
Identify additional safety measures to
protect the operator from the effects of
vibration such as: tool and accessory
maintenance, keep hands warm, standard
operating procedures.
CAUTION!
Wear ear defenders at a sound pressure
above 85 dB(A).
17