Declaration Of Conformity - WEG ODP Instrucciones Para La Instalacion Y Mantenimiento

Manufacturer's name and
Address:
We declare under sole responsibility that the products:
* Single- or three-phase induction motors (cast iron frame)
IEC frame 63 up to 355M/L
* Single- or three-phase induction motors (aluminum frame)
IEC frame 63 up to 132M
* Single- or three-phase induction motors (cast iron frame)
NEMA frames 143 up to 587 and 56
to which this declaration relates are in conformity with the following standards:
* IEC 60034-1/2 / 2A/5/6/7/8/9/11/12/14
European Standard
EN 55014-1:1993+A1:1997+A2:1999 DIN EN 55014-1:1999-10 VDE 0875 Part 14-1:1999-
10
EN 61000-6-2:1999
EN 61000-3-2:1995+Corr.:1997+A1:1998 + A2:1998
VDE 0838 Part 2:1998-10
EN 61000-3-2:1995/A14:2000 DIN EN 61000-3-2/A14:2001-01
01
Designation:
The motors are provided with a CE mark, since January 1st, 1996.
By design, the motors, considered as components, comply with the requirements of following
European Directives:
Low Voltage Directive 73/23/EEC from February 19th, 1973, amended by Directive 93/68/EEC
of July 22nd, 1993,
EMC Directive 89/336/EEC from May 3rd, 1989, including amendments, regarding to the
intrinsic characteristics to emission and immunity levels of Electromagnetic Compatibility
(EMC),
Machinery Directive 89/392/EEC from June 14th, 1989, amended by 91/368/EEC, 93/44/
EEC and 93/68/EEC, in accordance with article 4(2) and annex IIB, Paragraph B, provided
the motors are installed according to our Installation and Maintenance Instructions. The
above mentioned directives were combined, without deviation, in one document as Directive
98/37/EC from June 22nd, 1998. The Directive 98/37/EC cancels and replaces these old
Directives.
Certificate of Incorporation:
The above products cannot be put into service until the machinery into which they are
incorporated has been declared to be in conformity with the Machinery Directive (89/392/
EEC).
The Safety Notices in the product documents and the applicable installation specification (for
instance EN 60204) must be followed.
Jaraguá do Sul, June 16th, 2006

DECLARATION OF CONFORMITY

WEG EQUIPAMENTOS ELÉTRICOS S.A. - MOTORES
Av. Prefeito Waldemar Grubba, 3000
89256-900 Jaraguá do Sul –SC - Brazil
* IEC 60072 - 1/2
German Standard
DIN EN 61000-6-2:2000-03
Siegfried Kreutzfeld
Engineering Director
15
VDE-Classification.
VDE 0839 Part 6-2:2000-03
DIN EN 61000-3-2:1998-10
VDE 0838 Part 2/A14:2001-