Fitting; Mechanical Installation - Festo HME-16-100 Serie Instrucciones De Utilizacion

HME−...
Fitting in a vertical or sloping position
Make sure that the guide tubing has re
S
ached a stable position when the operat
ing voltage is switched off or if there is a
power failure (e.g. the lowest point or
secure it with moveable bolts, e.g.
cylinder).
Use the HME−... in conjunction with a sep
S
arately switched emergency stop circuit.
Note that the modules are protected against discharges of static electricity
S
(ESD) only when the housing cover is closed.
Operation of the HME−... with open housing cover is not permitted.
5

Fitting

Mechanical installation

Fitting in a vertical or sloping position
Warning
Uncontrolled moving masses can cause injury to people (danger of fingers
being squashed) or damage to property.
S Check whether additional external safety measures are required to prevent
the work load from sliding down.
The HME−... has no self−locking.
30
Fig. 4
Festo HME−... 0604NH English