CONNECTIONS
PRECAUTIONS beFORe first USE
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the mains voltage
and before all other connections have been made.
•
Do not cover any vents and make sure that there is a space of several
centimetres around the unit for ventilation.
Connection
1. Connect external power adaptor with external power adaptor jack and
the power source.
2. Push the standby button to switch on the unit, standby indicator will
be off. If the b standby indicator lights up, it means the power supply is
normal, now your system is ready for use.
FM RADIO
FM Radio Tuning
1. Press function button repeatedly to select radio mode, FM indicator will
be light up.
2. Tune to the required station by turning tuning knob to tune the radio
frequency, which is shown on the dial scale.
3. Select desired volume by turning volume knob.
Hints for better reception
the Receiver has a built-in FM wire antenna hanging at the rear cabinet. This
wire should be totally unravelled and extended for best reception.
EN
17