Aux In Jack & Encoding; Recording - auna Challenger LP Manual Del Usaurio

AUX IN JACK & ENCODING

Recording

1. Before switch on the unit, insert USB memory device to USB slot.
2. Press standby button to switch on the unit, then select AUX mode.
3. Press the REC button, then AUX indicator will be flashing.
4. To finish encoding, press REC button again, then the unit will switch to
USB mode and play the previous recorded track.
Remark:
• The recording speed is 1:1 and according to the actual playing time of
the phono.
• The recording format is preset at MP3 bit rate : 128 kbps.
• Do not unplug the USB device during recording.
EN
19