Bt Connection; Earphone Jack & Line Out Socket; Energy Saving - auna Challenger LP Manual Del Usaurio

Remark
• If you connect the system to MP3 player via the USB socket, due to
variances in MP3 encoding format, some MP3 players may not be able
to play via the USB socket. This is not a malfunction of the system.
• There are numerous USB device producers are. Solution and format are
variable between each other. Therefore, we do not guarantee this unit
can support all USB device from every brand.
Removing of USB device
To remove the USB device, turn off the power or switch the function mode
to other mode (PHONO, AUX or radio) first, then unplug the USB by pulling
out from the socket directly.

BT CONNECTION

Press function button repeatedly to select BT mode, bt indicator will be
flashing, then the unit is ready for connection with your BT device (such as
mobile phones).
Switch on the BT function of your BT device, and select "Challenger LP" BT
equipment for connection.
After your BT device is connected with the unit via BT, BT indicator light will
stay on, start to playback your device
EARPHONE JACK & LINE OUT SOCKET
• This system can be connected with headphone or external amplifier /
speaker by 3.5-mm earphone jack.
• This system can be connected with external device (eg. amplifier and
speaker) by line-out socket at rear cabinet.

ENERGY SAVING

If there is no audio signal from turntable / USB / AUX in for over 10 minutes,
the unit will automatically switch to standby mode for energy saving.
EN
21