AQUALUX ALPHA Manual De Instrucciones página 14

STEP 5
By each strap, drill a 12-mm-diameter, 80-mm-deep hole approximately 25 centimetres from the bar.
Insert the bolts by hand, and then drive them in using a mallet, only the rounded part should be visible.
STEP 6
Raise the flush bolts and secure the
STEP 7
Take up position on the opposite length of the pool.
By each strap, drill a 12 mm diameter, 80 mm deep hole approximately 50 centimetres from the bar.
Insert the bolts by hand, and then drive them in using a mallet. Only the rounded part should be visible.
STEP 8
Raise the flush bolts and secure the eye on each strap onto them (see photo, step 6).
Pass each strap through the slot in each ratchet.
Move each handle (ratchet) a few times, working on opposite ratchets in succession to achieve optimal
even tension (there should be no folds in the cover).
Complete the procedure by folding the ratchet(s) flat.
NOTCOUVEGA – ind F FRGBSP
Attaching on the storage side
Putting the straps into position on the storage side
on each strap onto them.
eye
Securing on the unrolling side (strap with ratchet + eye)
Putting the straps into position on the unrolling side
14 / 24