KENMORE ELITE PreView Grab-N-Go Manual De Uso Y Cuidado página 13

Removing the doors is always recommended when it is necessary to move the refrigerator through a narrow
opening. If it is necessary to remove the handles, follow the directions below.
Handle appearance may vary from the illustrations
on this page.
Loosen the set screws located on the lower side of
handle.
If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
Handle appearance may vary from the illustrations
on this page.
Replacing Freezer Drawer Handle
footprints over the mounting fasteners and tightening
If the handle mounting fasteners need to be
tightened or removed, use a ¼ in. Allen wrench.
When assembling or disassembling the handles:
cause injury.
Prevent the handle from swinging toward nearby
people or animals.
Insert the bracket hole of the handle into the stopper
bolt of the door exactly, then assemble the set screws
Check for any gap between the door and handle after
13