KENMORE ELITE PreView Grab-N-Go Manual De Uso Y Cuidado página 41

Turn the main water supply on and
is clear.
valve after about one quart of
tubing.
9
Before making the connection to the refrigerator, be sure
that the refrigerator power cord is not plugged into the
wall outlet.
1.
end of the tubing as shown.
3. Insert the end of the copper tubing into the connection
as far as possible. While holding the tubing, tighten the
Tubing Clamp
¼ in.
Compression
Nut
Ferrule
Tighten any connections that leak.
connections.
Arrange the coil of tubing so that it does not vibrate
against the back of the refrigerator or against the wall.
Push the refrigerator back to the wall.
¼ in. Tubing
Turn the icemaker ON at the control panel.
Refrigerator
The icemaker will not begin to operate until it reaches
Connection
will then begin operation automatically if the icemaker
button has been turned ON.
41
Check to see if leaks occur at the water line