Easy Pairing - Motorola Talkabout T11 Serie Manual De Instrucciones

Automatic Power Save
For better battery life, your radio is designed to switch to
Power Save mode when there has been no transmissions
after 3 s. The radio can receive transmissions in this mode.

Easy Pairing

This feature allows a group of radio users to program all their
radios to the same Channel and Sub-Code settings quickly
and simultaneously. Any radio within the group can be
designated as the "Leader's radio" and have it's Channel
and Sub-Code settings transmitted to and copied by all the
other radios in the group called "Members' radios".
Note: When the "Leader's radio" has no Sub-Code feature,
all radios in the group will have their Sub-Code set to
zero. When the Sub-Code is set to zero, all
transmissions on the selected channel will be heard,
regardless of the transmitting radio Sub-Code setting.
1. Pick any of the radios as the "Leader's radio". On this
radio, program the Channel and Sub-Code to the desired
settings. See "Selecting the Channel" and "Selecting the
Sub-Code" sections in this user manual. The Sub-Code
for your radio is fixed at zero and cannot be programmed.
2. To copy the channel and Sub-Code combination to all the
other "Members' radios", press and hold the
the Members' radios" until you hear a beep. Release the
button after the beep, and wait for the transmission from
the "Leader's radio."
12
Note:
• You will see the
confirms that the radio is in Easy Pairing mode
waiting to receive the Channel and Sub-Code settings
from the "Leader's radio". All "Leader's radio" will
remain in this mode for three minutes.
• A group with many radios should have all users take
this step at the same time, so all radios can be
programmed together.
3. On the "Leader's radio", press and hold down the
button until you hear a double beep.
Note:
• At the double beep, this radio's Channel and Sub-
Code settings will be transmitted, which will be
received and copied by all the other "Members'
radios".
• The "Leader's radio" must make this transmission
when all the "Members' radios" are still in the Easy
Pairing mode, otherwise the transmission will not be
picked up.
• On the "Leader's radio", user must remember not to
release the button on the first (single) beep, otherwise
this radio will become another "Member's radio". If
that happens, you can press PTT to escape, and retry
button on
the steps described in Step 3.
icon blinking on the display. This