2. IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed, including the following:
1.
Read all instructions carefully before first use.
2.
To protect against risk of electrical shock, do not put motor base and cord in water or other
liquids.
3.
Close supervision is necessary when any appliance is used by or near children.
4.
Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning.
Make sure appliance is OFF when not in use, before putting on or taking off parts, and before
cleaning.
5.
Avoid contacting moving parts.
6.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner. Return appliance to authorized service facility for
examination, repair, or electrical or mechanical adjustment.
7.
The use of attachments not recommended or sold by the manufacturer may cause fire, electric
shock, or injury.
8.
Do not use outdoors.
9.
Do not let cord hang over the edge of table or counter.
10. Do not let cord contact hot surface, including the stove.
WARNING
1.
Disconnect from supply circuit before opening.
2.
To ensure continued protection against risk of electric shock, connect to properly grounded
outlets only.
3.
Do not immerse motor base, cord, or vacuum pump in water.
4.
Be sure to turn switch to OFF position after each use of your machine. Make sure the motor stops
completely before disassembling.
5.
Do not put your fingers or other objects near moving blades while the Dynapro blender is in
operation.
6.
Do not use the appliance if any part is damaged.
7.
Never run the machine with an empty container. If you are running a test, you may use water
inside the container to blend.
•
Automatic Overload Protection details on Troubleshooting page.
6