Operating Instructions - Tribest Dynapro DPS-2200 Manual De Funcionamiento

4. OPERATING INSTRUCTIONS

1
Begin by filling the CONTAINER with
ingredients—softer, moist foods first
(liquids / fresh fruits / leafy greens /
powders) and hard, solid foods last
(veggies / ice / frozen fruits / nuts).
4
Turn on the machine by toggling the
red-colored ON/OFF SWITCH on the lower
right-hand side of the MOTOR BASE.
7
Once ingredients begin circulating, use
the Stainless Steel SCOOP to mix or
push ingredients down while blending as
needed. Simply remove the CENTER CAP
from the center of the LID to insert your
SCOOP through the opening while the
machine is running and the LID is still on.
Don't worry—the SCOOP will not touch
the blades.
8
2
Top view of
Seal the CONTAINER by setting the LID
down on it so that the side tabs are offset.
The CENTER CAP should be tightly in place
on the LID.
5
1:30
See details
on next page.
To start your blend, select between the
following one-touch features:
• MANUAL CONTROL DIAL
Manually adjust the speed.
• TIMER CONTROL DIAL
Set a countdown timer.
• PRESET BUTTONS
Select any blending cycle(s).
8
Once you are done blending, turn off the
machine. If your blend is vacuum sealed,
release the vacuum by pulling up the tab
on the black silicone seal in the middle of
the CENTER CAP.
3
offset side
tabs
Optional: Vacuum seal the CONTAINER
using the one-touch VACUUM PUMP. See
instructions for this on the next page.
6
Press the Start/Pause Dial to start
or pause blending. If using PRESET
BUTTONS, the machine will start
automatically. Easily configure the
CONTROL PANEL as you're blending to
adjust the speed or time by using the dials.
9
In order to remove the LID, use your
fingers to pull away the offset tabs on the
CONTAINER and LID. Hold the CONTAINER
by the HANDLE, pour out contents, and
enjoy!