Parts - Tribest Dynapro DPS-2200 Manual De Funcionamiento

3. PARTS

VACUUM PUMP
1
One-Touch VACUUM PUMP pairs with the special build of our Dynapro containers to easily create
a tight vacuum seal before blending your most sensitive ingredients. Protect your recipes from
oxidizing in just seconds. Battery powered for easy transport.
(Only included with the DPS-2250 model.)
STAINLESS STEEL SCOOP
2
Mix or push down fussy ingredients while blending. Remove the CENTER CAP of the LID to use
the stainless steel SCOOP while in operation and after blending to easily remove your blend from
under the blades. Doubles as a simple tool for measuring.
CENTER CAP
3
Twist off the CENTER CAP to insert fresh ingredients or the SCOOP for agitating your blend while
the machine is in operation. Place and tighten the CAP on the LID to begin your vacuum blend.
VACUUM-SEALED LID
4
The LID features a triple seal to ensure your vacuum seal stays tight, even when blending at high
speeds with extra power. The silicone seals are easily removable for washing.
STAINLESS STEEL BLADES
5
Durable 4-pronged stainless steel BLADES work to thoroughly blend a variety of recipes from
smoothies to frozen sorbets, soups, sauces, purées, and more. Easily power through everything
from ice and frozen fruits to leafy greens for smooth results in every blend.
BLENDING CONTAINER
6
Made from BPA-Free Tritan, this durable container is ideal for blending medium to large
family-sized and food service batches. Save time and easily fill using the pre-marked fill lines to
indicate oz and ml.
HANDLE
7
Ergonomic HANDLE ensures comfortable grip and easy pouring, even when your container is full.
RAW TEMPERATURE INDICATOR
8
INDICATOR STAR on the CONTAINER changes from blue to white at 118°F (48°C) to help you
see clearly when your recipe is heating up.
BLADE CLUTCH
9
Holds your CONTAINER in place and transfers the power of your motor to your container for
powerful blending. This is attached to the bottom of the container.
BASE PAD
10
Ultra-thick PAD sits on top of the MOTOR BASE for added stability and is easy to clean up
between batches. Be sure the PAD is securely attached to the base before blending.
MOTOR BASE
11
All-new, powerful 2.5 peak horsepower motor spins 10% faster with over 32,000 RPM providing
all the power needed for every type of blend. The power cord wrap is located on the bottom of
the MOTOR BASE for convenient storage.
ON/OFF SWITCH
12
The main power switch that turns the machine on and off is located on the lower right-hand side
of the MOTOR BASE. Power off to conserve energy between uses.
CONTROL PANEL
13
LCD Display, Manual Control Dial, and Timer Control Dial work together for ultimate control.
1
3
4
5
6
8
9
10
11
13
2
EN
7
12
7