Maintenance - KOBE IS-124 Serie Instrucciones De Instalación Y Manual De Operación

MAINTENANCE

SAFETY WARNING
NEVER PUT YOUR HAND INTO AREA HOUSING THE FAN WHILE THE FAN IS
OPERATING.
Cleaning Hood Surface
CAUTION
:
For optimal operation, clean range hood and all baffle/spacer/filter/oil tunnel/oil container regularly.
*** Regular care will help preserve the appearance of the hood.
1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth.
2. If hood looks splotchy (stainless steel hood), use a stainless steel cleaner to clean the surface
of the hood. Avoid getting cleaning solution onto or into the control panel. Follow directions of
the stainless steel cleaner. Caution: Do not leave on too long as this may cause damage to
hood finish. Use soft towel to wipe off the cleaning solution, gently rub off any stubborn spots.
Use dry soft towel to dry the hood.
3. DO NOT allow deposits to accumulate or remain on the hood.
4. DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere to the surface
and cause rusting.
5. DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to remain in
contact with stainless steel for extended periods. Many of these compounds contain chemicals,
that may be harmful. Rinse with water after exposure and wipe dry with a clean lint free cloth.
To Clean or Replace Aluminum Mesh Filter
CAUTION
:
OVERFLOW.
1. The LCD display will indicate
2. Remove all aluminum mesh filters.
3. Wash with warm soapy water. Dry completely before returning Filter.
NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS. DO NOT
USE PAPER TOWEL ON STAINLESS STEEL.
DRAIN OIL FROM ALUMINUM MESH FILTERS BEFORE OIL CAN
when aluminum mesh filter needs cleaning.
13