Replacing Light Bulb
CAUTION: HALOGEN LIGHT UNIT MAY BE HOT! WAIT UNTIL UNIT IS COOL.
1. Make sure all controls are off, and range hood is unplugged.
2. Place a flat-headed screwdriver into the groove between the halogen light glass covering and
the metal halogen light housing.
3. Pop out the halogen light glass covering.
4. Gently pull out the defective light bulb and discard.
5. Using a cloth, hold the new light bulb and push securely into light socket. Light bulb should be
12V 20W maximum.
6. Cover the halogen light housing with halogen light glass cover.
7. Turn range hood light ON to test for operation.
14