Control Elements And Connections - Spelsberg BCS Pure Instrucciones De Montaje

The charging station switches off the charging point in case of the following ambient conditions:
„
Overload
„
Temperature too high
„
Temperature too low
„
Humidity too high
„
Sabotage attempts (BCS Smart only)

Control elements and connections

2
8
Figure 1: Overall view
Pos . no . . Description
1 Housing cover with special head screws (tool enclosed)
2 230 V with child lock (one on each side)
3 System connector, e.g. Bosch or Shimano, depending on the equipment
4 BCS Smart only: supply line for LAN connection
5 Supply line for rechargeable battery-specific system connector
6 Supply line for rechargeable battery-specific system connector
7 Mains connection
8 System connector, e.g. Bosch or Shimano, depending on the equipment
9 LED status display
10 External fixing brackets
Under the housing cover, there are LEDs that display the status of the respective charging point.
LED
Off
Green
Green/flashing
Red
9
10
7
Status
Charging point off
Charging point ready or charging process finished
Charging process running
Fault at charging point
6 5 4
1
2
3
23