Fastening with external fixing brackets
You need the following for fastening the charging station:
4 external fixing brackets ABL-10 (wall distance 10 mm) or ABL-40 (wall distance 40 mm)
4 screws for the external fixing brackets (enclosed)
4 screws (diameter maximum 6 mm, screw head at least maximum 12 mm)
4 matching dowels
Figure 10: Assembly ABL-10
Figure 11: Assembly ABL-40
►
Mount the external fixing brackets (Figure 10 or Figure 11).
►
Mark the fixing points.
►
Drill holes for the fixing points.
►
Push the dowel into the boreholes.
Figure 12: Wall assembly
►
Screw the charging station tight by screwing one screw each through
the boreholes in the external fixing brackets (Figure 12).
45°
45°
4x
Ø max. 6 mm
Ø max. 12 mm
3 Nm
3 Nm
27