Headset Adjustment - Cervélo S3 Manual De Montaje

HEADSET ADJUSTMENT

1. Insert lightly greased M5 x 100 mm preload screw
through the preload insert and thread into the fork
ramp hole on the drive side.
2. Tighten preload screw to remove any play in the
bearings.
NOTE: This diagram is for assembly
reference only. During complete
assembly, hoses and control cables
will be present.
Preload Screw
M5 x 100 mm
Actual Size
NOTE: The preload
screw ships with
the ST029 stem.
100 mm
20