Tire Clearance - Cervélo S3 Manual De Montaje

TIRE CLEARANCE

Your Cervélo bicycle complies with the ISO 4210-2:4.10.2 standard for tire clearance. In order to comply with these safety standards and
maintain your Limited Lifetime Warranty, a minimum of 4 mm of clearance must remain between the tire and any frame element. Due to
the growing complexity of tire and rim interfaces, Cervélo recommends identifying the available space before choosing a tire.
4 mm
minimum
4 mm
minimum
1. Measure the space between the
chainstays at the bottom bracket
junction.
2. Measure the space between the seatstays
at the top of the tire.
3. Using the smallest of those two
numbers, subtract 8 mm (4 mm per side)
to determine the remaining space.
4. With the tire installed and fully inflated
on your wheel, measure the tire width to
ensure that it fits.
Contact between the tire and the
frame or fork may result in a loss of
control while riding and potentially
serious injury. Failure to follow these
guidelines may result in damage to the
frame not covered by Cervélo Limited
Lifetime Warranty.
30