Introduction / Scope Of Supply - Weidmuller VT CTL Instrucciones De Empleo

References marked on instrument or in instruction manual:
Warning of a potential danger, follow with instruction manual.
Caution! Dangerous voltage. Danger of electrical shock.
Reference! Please use utmost attention.
Continuous Double or reinforced insulation category II IEC 536
Conformity symbol, the instrument complies with the valid direc-
tives.
Tester complies with the standard (2012/19/EU) WEEE.

1.0 Introduction / Scope of Supply

The instruction manual contains information and references,
necessary for safe operation and maintenance of the instru-
ment. Prior to using the instrument (commissioning / assembly)
the user is kindly requested to thoroughly read the instruction
manual and comply with it in all sections.
Failure to read the instruction manual or to follow with the warn-
ings and references contained herein can result in serious bodi-
ly injury or instrument damage. The respective accident preven-
tion regulations established by the professional associations are
to be strictly enforced at all times.
The Continuity Tester VT CTL is appropriate for continuity testing of
electronic wiring, line networks, systems, instruments and compo-
nents of a measurement impedance of 500 kΩ. It has 2 ranges, up to
10Ω and up to 500kΩ
The instrument is equipped with an additional incorporated torch func-
tion with steady burning light, facilitating any testing in dark switch cab-
inets or in case of diffuse lighting.
• Acoustic and optical continuity indication
• Torch Function
• Resistance ranges 10Ω and up to 500kΩ.
• Test current up to 20 mA (low range)
• Fixed mounted test leads with test probes
8