Publicidad
GB
Problem
Are you sitting on the seat
when adjusting the seat
height?
The seat does not rise.
Is the seat height in its highest
position?
Are you sitting on the front
edge of the seat?
The seat does not lower.
Is the seat height in the lowest
position?
Are you sitting on the seat
The seat slide lever does not
when adjusting the seat
work.
depth?
The lever at the front of the
left arm is locked.
The seat back does not
recline.
The reclining tension
adjustment lever is set to the
strong (back) position.
Casters do not move
Are they tangled with lint or
smoothly.
wool?
Are you using urethane
Casters are slippery.
casters on hard floors such as
a plastic tile floor?
Chair makes noise.
-
Please contact an official dealer.
31
Troubleshooting
Check
Solution
Adjust the seat height while
not seated on the seat.
The seat cannot rise beyond
the highest position.
Sit in the center of the seat
while adjusting.
The seat cannot lower beyond
the lowest position.
Adjust the seat depth while
not seated on the seat.
Lift the lever to release the
lock, and then lean against
the seat back.
Turn the reclining tension
adjustment lever to the weak
(front) position.
Remove lint or wool or replace
the casters.
Use rubber casters.
Visit a retail shop or the
nearest branch.
D
Page
16
16
16
16
Bauteile
17
18
19
Überzugmaterial
Polstermaterial
> XX < verweist auf das Material der Teile. Diese Informationen sind nützlich für das Recycling.
Beachten Sie bitte, dass sich die Produktspezifikationen ohne vorherige Ankündigung aufgrund von
Verbesserungen an dem Produkt ändern können.
Materialien
Teil
Hauptteil
Glasfaserverstärktes Polyamid >PA-GF<
Rückenlehne
Rahmen
Druckgussaluminium >ADC<
Äußere Schale
Glasfaserverstärktes Polyamid >PA-GF<
Sitz
Innere Schale
Recyceltes Polypropylenharz >PP<
Rahmen
Glasfaserverstärktes Polyamid >PA-GF<
Druckgussaluminium >ADC<
Basis der Stütze
Stahl
Polyurethan >TPU<
Verstellbare Armlehne
Glasfaserverstärktes Polyamid >PA-GF<
Druckgussaluminium >ADC<
Fuß
Druckgussaluminium >ADC<
Polyamid >PA<
Lendenwirbelstütze
Polyurethan >TPU<
Optionale
Teile
Kopfstütze
Glasfaserverstärktes Polyamid >PA-GF<
Kleiderbügel
Glasfaserverstärktes Polyamid >PA-GF<
Gewebe
Polyester
Stoff
Polyester
Sitz
Polyurethan >PUR<
Materialien
32
Publicidad
