Rear Panel - Peavey TRANSCHORU S210 Guía De Operación

Depth (18)
Adjusting this control clockwise will result in an increase in the depth or intensity of the chorus
effect. This control adjusts the amount of chorus you actually hear from the output of the amp.
T. Dynamics ¨ (19)
This control adjusts the usable power of the internal power amps from 10% (counter clockwise) to
100% (clockwise). Rotating this control clockwise will result in more available power. This effect is
often set to lower levels in order for the power amp compression simulation to be more apparent,
allowing you to overdrive the power amp at lower volume levels, achieving a tube power amp
clipping/compression quality.
Power LED (20)
Illuminates when power is supplied to the amp. If this LED is lit, the amp is on.

REAR PANEL

21 22 23 24 23 24 25
26
Power Switch (21)
Placing this switch in the ÒONÓ position will result in power being supplied to the unit. The Power
LED (20) will illuminate when the amp is on.
Stereo Headphone (22)
This 1/4Ó stereo output jack is designed to accommodate standard, stereo headphones. Plugging
a set of headphones into this jack will disconnect the signal going to the power amplifiers of the
unit, and no output can be heard from the unitÕs speakers. This feature provides an excellent
practice tool.
Power Amp In (23)
These left and right mono 1/4" jacks provide an input to each of the power amplifiers. When used
in conjunction with the Preamp Out jacks (24), a stereo effects loop is formed allowing the use
of stereo delays and various effects.
Preamp Out (24)
These left and right mono 1/4" jacks provide an output from each of the preamps. When used
in conjunction with the Power Amp In jacks (23), a stereo effects loop is formed allowing the use
of stereo delays and various effects.
Remote Switch (25)
This jack is provided for the connection of the supplied footswitch. The footswitch is a multi-function
type allowing you to select Clean, Crunch, or Lead and to defeat the Chorus effects. To use the
footswitch ensure that the footswitch plug is inserted fully into the jack and that the Select switch is
pressed in (down position) on the front panel.
6