Harness Labelling; Harness Inspection - Simarghu FIRE Manual De Instrucciones

7. HARNESS LABELLING

CE Mark
1
EN Standards
2
3 Manufacturer
4 Max Load
5 Product Reference
6 Serial Number
7 Date of Manufacture
Read Manual
8
QR Code with Serial Number
9
Size Guide
10
3
PO BOX 412 - Carlisle - CA1 9GR
+44 (0)1228 371 583
www.simarghu.com
4
MAX LOAD: 150Kg
5
MODEL: SIMFIRE
10 SIZE: M/L (86-106cm)
S/N: 000000
6
DOM: 06/2019
7
0598
1
POSITIONING ONLY!!! – NOT FOR FALL ARREST
8
EN813:2008
2
EN358:2018
9

8. HARNESS INSPECTION

REGULAR CHECKING AND RECORD KEEPING
This harness and all other equipment must be visually inspected
when delivered to site and thoroughly inspected before and after
every use. The harness must also be inspected by an authorized
and competent person at least every 12 months in accordance
to EN365. If you are unsure or have any doubt about the
condition of the harness you MUST remove it from service.
Use the RFID tag to easily identify and inspect your PPE! -
Download FALL SAFE INSPECTOR® on Apple Store or Google
Play and keep your PPE on track. For more information:
www.fallsafe-online.com/en/inspector.php
THOROUGH INSPECTION IS TO BE GIVEN TO EACH OF
THE FOLLOWING KEY AREAS:
Examine for cuts, cracks, tears, abrasions* and scorch
WEBBING
marks, burns or chemical attack.
STITCHING Look for broken stitches, loose or worn threads.
Inspect for any signs of damage, distortion, or corrosion
METALWARE
as well as ensuring correct operation.
LABELLING Ensure all label information is still legible.
*Common abrasion wear within webbing may be caused by passage over sharp edges
when under tension which may result in serious weakening. Slight damage to the outer
fibres and threads could be considered harmless; however serious damage such as
reduction of the thickness or width of webbing should lead to rejection and immediately
removed from service.
UK
13