Maintenance & Storage; Simarghu ® Po Box; Service Life - Simarghu FIRE Manual De Instrucciones

UK
9. MAINTENANCE & STORAGE
All maintenance work MUST be carried out by a competent fully
trained person. However users should clean the harness when
required.
CLEANING SHOULD BE DONE WHEN:
• The harness has been used in salty environment.
• If the harness has a coating of oil, soil, mud or any contaminant.
WHEN CLEANING:
Place the harness on a flat surface. Using a damp sponge wipe
down harness to remove excess dirt, dust or sand. DO NOT
use cleaners that contain chlorine, bleach or abrasives. DO NOT
immerse the harness in water.
If the harness is defective in any way please complete the
Examination Form stating all defects and remove from service
immediately, and contact:
SIMARGHU
®
PO BOX 412
Carlisle
CA1 9GR
T: +44 (0)1228 371 583
E: info@simarghu.com
www.simarghu.com
14

10. SERVICE LIFE

This product has a life of 10 years from date of manufacture and 5
years from date of first use.
Extreme factors may considerably reduce the serviceable life of
a harness. For example, if the harness has been damaged due
to mechanical wear, harsh treatment, prolonged exposure to UV
Rays or other environmental factors such as contact with salt or
sand, exposure to high heat or cold and icy conditions.
If the harness is bleached of colour, abraded, worn or cracked
fibres then it MUST be removed from service.
WARNING
If the user is in any doubt about the condition of the product
however insignificant, they must either render it unusable
and remove from service immediately or place in quarantine
so that it may not be used by mistake. The harness can
only be returned to service by written authorisation by
manufacturer or a trained individual.
HOW TO REGISTER YOUR HARNESS
Within the Simarghu® harness there is a digital tag called
Inspector®. The Inspector® tag allows you to register your
harness and easily identify and keep track of inspections.
For more information:
www.fallsafe-online.com/en/inspector.php