RF Player RF P1000 Manual De Usuario página 27

Examples:
a. You wish to repeat the BLYSS and VISONIC868 protocols. In this case, click these protocols in
the list. Then position in the Receiver tab, the frequencies 433,920 and 868,950Mhz.
b. You want to repeat the Oregon Chacon and X2D868 protocols. In this case, click these protocols
in the list. Then position in the Receiver tab, the frequencies 433,920 and 868,350Mhz.
c. You want to repeat the RTS and X2D868 protocols. In this case, click these protocols in the list.
Then position in the Receiver tab, frequencies 433,420 and 868,350Mhz.
d. You want to repeat the Chacon, RTS, and X2D868 protocols. A problem arises because Chacon
and RTS are on different 433 Mhz frequencies. In this case, click these protocols in the list. Then
position in the Receiver tab, the frequencies 433,420 or 433,920Mhz, and 868,350Mhz. Then
choose the selectivity «1» on the 433Mhz. This choice of selectivity will certainly allow listening
to the 433,420 and 433,920 Mhz simultaneously, but will also decrease the sensitivity of the
receiver in 433Mhz. Additionally, 433MHz radio sources must not be overly out-of-band.
e. You want to repeat the RTS and X2D868 protocols, VISONIC868. A problem arises because
X2D868 and VISONIC868 are on different frequencies 868Mhz. In this case, click these protocols
in the list. Then position in the Receiver tab, the frequencies 433,420Mhz and 868,350 or
868,950 Mhz. Then choose the selectivity «1» on the 868Mhz. This choice of selectivity will
certainly allow listening to the 868,350 and 868,950 Mhz simultaneously, but will also decrease
the sensitivity of the receiver in 868Mhz. In addition, 868MHz radio sources must not be overly
out-of-band.
user guide RF P1000 v1.0 - www.rfplayer.com
EN
27