Battery Testing; Diodes And Continuity Testing - Steren MUL-650 Manual De Instrucciones

BATTERY TESTING

Connect the black test cable in to the COM terminal and the red test lead in to the terminal
1
Turn the knob to the
2
Tap the circuit with tips. The measurement value will be displayed.
3

DIODES AND CONTINUITY TESTING

Connect the black test cable in to the COM terminal and the red test cable in to the V Ω Hz terminal.
1
Turn the knob to
2
Press the "SELECT" button to select diode or continuity measurement.
3
To measure diodes connect the tips to the semiconductor component: the red to the anode
4
and the black to the cathode.
To measure continuity, tap with tips the circuit or wire that you want to check. The
measurement value will be displayed.
NOTE:
Make sure that the circuits are out of power and the capacitors are fully discharged to prevent electric shocks or damages to
the device.
position.
SELECT HOLD RANGE
Hz
Hz
(IL 25mA)
Red cable
V
OFF
20A
MAX 10 SEC.
A
CAT.IV 600V
mA CAT.III 1000V
COM
T
20A MAX FUSED
400 mA MAX FUSED
position.
SELECT HOLD RANGE REL
Hz
Hz
(IL 25mA)
A
V
mA
OFF
A
20A
V Hz
MAX 10 SEC.
A
CAT.IV 600V
mA CAT.III 1000V
COM
T
20A MAX FUSED T
400 mA MAX FUSED
REL
A
mA
A
V Hz
Black cable
T
Red cable
Black cable
10