Frequency And Percentage Of The Working Cycle Measurement; Temperature Measurement - Steren MUL-650 Manual De Instrucciones

FREQUENCY AND PERCENTAGE OF THE WORKING
CYCLE MEASUREMENT
Connect the black test cable in to the COM terminal and the red test cable in to the V Ω Hz terminal.
1
Turn the knob to Hz position.
2
Press the "Hz / %" button or choose the frequency test or the percentage of the working
3
cycle.
Tap the circuit with tips. The measurement value will be displayed.
4

TEMPERATURE MEASUREMENT

Insert the black thermocouple connector into the T- terminal and insert the red connector
1
into the T+ terminal.
Turn the knob to the ºC position.
2
Tap with the tip the piece whose temperature you want to measure; Hold the contact
3
until the reading stabilizes.
9
SELECT HOLD RANGE
Hz
Hz
(IL 25mA)
V
OFF
20A
MAX 10 SEC.
A
CAT.IV 600V
mA CAT.III 1000V
COM
T
20A MAX FUSED
400 mA MAX FUSED
SELECT
Hz
V
OFF
20A
MAX 10 SEC.
A
mA
T
Red connector
REL
Red cable
A
mA
A
V Hz
Black cable
T
HOLD RANGE REL
Hz
(IL 25mA)
A
mA
A
V Hz
CAT.IV 600V
CAT.III 1000V
COM
20A MAX FUSED T
400 mA MAX FUSED
Black connector