Relationship To The Authorities; Technical Data - Jøtul MF 3 Instrucciones Para Instalación

Table of contents
1.0 Relationship to the authorities ................ 9
2.0 Technical data .......................................... 9
3.0 General safety precautions ................... 10
4.0 Installation............................................... 10
5.0 Use ............................................................11
6.0 Maintenance ............................................ 13
7.0 Service ..................................................... 13
8.0 Optional Equipment and Accessories .. 13
9.0 Operational problems - troubleshooting 14
10.0 Recycling............................................... 14
11.0 Guarantee terms ................................... 14
Figures........................................................... 70
Register your fi replace at jotul.com for a
25-year warranty.
On all our products there is a
Product:
Jøtul
label indicating the serial number
Room heater fired by solid fuel
and year. Write this number in the
Standard :
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials:
place indicated in the installation
Emission of CO in combustion products :
Flue gas temperature
:
Nominal heat output :
Efficiency : instructions.
Operation range :
Fuel type :
Operational type :
The appliance can be used in a shared flue.
Always quote this serial number
Country Classification Certificate/ Approved by
standard
Norway Klasse II
when contacting your retailer or
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
Jøtul.
SP Swedish National
Testing and Research
EUR Intermittent EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
Serial no.
1.0 Relationship to the
authorities
Installation of a fi replace must be according to local codes
and regulations in each country.
All local regulations, including those that refer to national
and European standards, shall be complied with when
installing the product.
Instructions for mounting, installation and use are enclosed with
the product. Prior to using the product the installation must be
inspected by a qualifi ed person.
A product data label in heat resistant material can be found
on the heat shield at the back of the product. This contains
information about identifi cation and documentation for the
product.

2.0 Technical data

Material:
Finish:
Fuel:
Log length, max:
Flue outlet:
Flue pipe dimension:
Approx. weight:
Optional extras:
Dimensions, distances:
Technical data according to EN 13240
Nominal heat output:
Flue gas mass fl ow:
Recommended chimney
draught:
Effi ciency:
CO emission (13% O ):
2
Flue gas temperature:
Operational type:
ENGLISH
Cast iron
Black paint
Wood/coal
40 cm
Top, rear
Ø150 mm, 177 cm cross section
2
124 kg
Decorative enamelled fl oor plate in
blue black - Rear heat shield, short
legs* (see 8.0)
See fi g. 1
Wood Briquetted Coal
7,0 kW 4,0 kW
4,8 g/s 6,7 g/s
12 Pa 12 Pa
79%@7,4kW 70%@3,9 kW
0,30% 0,63%
330 o C 228 o C
Intermitterende Intermitterende
9