Fixing The Camera Bracket; Connecting The Camera; Infrared Lighting System; Description Of The Monitor - Extel O'CUP Instrucciones De Uso E Instalación

Choose a suitable location to install the camera. As far as possible your system must be
installed in a dust-free place with weak vibrations and a good circulation of air and must be
equipped with a wall socket for the 5V
When installing the camera, check the good reception of the image on the monitor before
the final installation. For example ask another person to hold the camera in the area to
control.
Move the monitor to different places of the house to control the good reception.
If you find some interference or other problems, please refer to the chapter "Maintenance".
b. Fixing the camera bracket (fig.4)
• Make sure that no element interferes with the installation.
• Search for a suitable place to fix the bracket.
• Screw the wall part with the supplied screws (use bushing if necessary).
• Screw the camera on the bracket.
• Aim the camera at the desired direction and tighten the side retaining screw.
c. Connecting the camera
• Connect the cord of the 5V
• Plug the adaptor into a mains socket.
The camera can be installed outside but the adapter must be plugged in inside the
building.
d. Infrared lighting system
• The infrared diodes do not produce light visible to the naked eye.
• The infrared lighting system turns on automatically in the darkness (1,5 lux : use an addi-
tional lighting system overnight).

4. INSTALLING THE MONITOR

a. Description of the monitor (fig. 1)
1. LCD screen 9cm (3,5")
2. Light indicator (Charging the batteries)
3. Light indicator (ON/OFF)
4. DC IN jack power supply
5. Volume adjustment
6. ON/OFF button
7. Speaker
8. Hole for fixing the bracket
9. 5V adaptor
b. Installing the monitor (fig. 5)
CAUTION
Only place the monitor on stable and hard surfaces.
Select a smooth surface for the suction cup to adhere as firmly as possible.
GB3
adaptor.
adaptor to the "Power supply" plug of the camera.
CFI EXTEL O'CUP - 02/2013 - V1